Ez Setup (With Auto Clock Setting); Ez Setup During The First Power On - Sharp Aquos LC-20B4U Operation Manual

EZ SETUP (WITH AUTO CLOCK SETTING)
• When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels and clock.
Please perform the following instructions before you press MAIN
POWER.
(1) Insert the batteries into the remote control. (See page 8.)
(2) Connect the antenna cable to the TV set. (See page 9.)
(3) Connect the AC adapter to the POWER INPUT terminal of the
product and plug in the AC cord to the wall outlet. (See page 10.)
SELECT:G ENTER:. EXIT:.
EXIT:.
SELECT:~
ENTER:.
SELECT:~
ENTER:. EXIT:.
EZ SETUP
AUTO CLOCK
In'
ON
OFF
EZ SETUP
CH·SETTING
In'
ON
OFF
SELECT LANGUAGE
In'
ENGL I SH
ESPANOL
FRANCAIS
Press ENTER to access AUTO
CLOCK mode.
1
Press MAIN POWER, located on
the upper side of the main unit, to
turn on the TV. The SELECT
LANGUAGE mode will be dis-
played.
2
Press
~.lT
to select "ENGLISH",
"ESPANOL (SPANISH)" or
"FRANCAIS (FRENCH)", and press
ENTER.
3
Press
./T
to select ON or OFF.
When you select ON, the TV set
will automatically memorize the
broadcasting channels.
4
Press
./T
to select ON or OFF.
When you select ON, the TV set
will automatically adjust the clock
to search time-signals (EDS
signals), which are provided by
some TV stations. The AUTO
CLOCK setting may take from
several minutes to an hour depend-
ing on the number of channels to
receive and signal status. If you
know the channel of the EDS signal
carrier (PBS or other) in your area,
select OFF and follow the proce-
dure in AUTO CLOCK Setting.
(See pages 17, 18)
5
Press ENTER to access start EZ
SETUP mode.
MAIN POWER
Control section of main unit
LNm>
• If you select OFF in "EZ SETUP CH-SETTING", EZ SETUP will be canceled.