Cleaning And Maintenance - Philips PT925 User Manual

3 After trimming, press the on/off button once to
switch off the shaver.
4 Clean the trimmer (see chapter 'Cleaning and
maintenance').
5 Close the trimmer ('click').

Cleaning and maintenance

Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the shaver and the Jet Clean
System.
- The best and most hygienic way to clean the
shaver is in the Jet Clean System. You can also
rinse the shaver under the tap or clean it with the
cleaning brush supplied.
- Clean the shaver after every shave for optimal
shaving performance.
- Regular cleaning guarantees better shaving
performance.
- For the best cleaning results, we advise you to
use the Philips Cleaning spray (HQ110) and the
Jet Clean solution (HQ200).
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Note: Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.
English
13