Table of Contents
Advertisement
Push the speaker button. Once you have a dial tone:
Dial your number
Remember, you don't need to dial 9 first in order to get an outside line with Horizon.
To select a number you've called before, press the Redial soft key. Use the navigation button to scroll
up and down the list and highlight the number you want to dial. Then either:
pick up the handset (the call will automatically connect) or
press the Dial soft key.
If you want to edit the number before dialling, press the EditDial soft key.
To set up additional functions, such as speed dials or the company address book, you'll need to go
through the Horizon Portal.
Taking calls
You can answer a call on the Cisco 504 in three ways:
By lifting the handset.
By pushing the headset button with the handset still on the phone.
By pushing the speakerphone button with the handset still placed on the phone.
Taking multiple calls
You can also take up to three calls on a single line. To do this, you must first activate Call Waiting:
To turn on Call Waiting, press *56 on your keypad.
To turn off Call Waiting, press *57 on your keypad.
The information contained within this document, or subsequently provided, whether verbally or in documentary form, is confidential to Gamma and is provided to
the organisation named within this document only. It shall not be published, disclosed or reproduced wholly or in part to any other party without our prior written
consent. Gamma has made all reasonable efforts to ensure the accuracy and validity of the information provided herein and we make no warranties or
representations as to its accuracy. Gamma should be notified of all requests for disclosure of Gamma supplied information under the Freedom of Information Act.
Press Dial to place the call
Advertisement
Table of Contents
