Panasonic AG-TL350B Operating Instructions Manual page 7

t
Tracking (–, +) buttons/V-LOCK buttons
These buttons are used to adjust the tracking or to
compensate the vertical dancing during still picture.
If noise appears on the playback picture, press the
buttons to adjust the tracking is such a way that the
picture is made as clear as possible. When both
buttons are pressed together during 3- or 6-hour
mode playback,
automatically.
If the image shakes slightly in the vertical direction
during still picture, press the V-LOCK buttons to
reduce the dancing.
Further, the time/date display position can be
adjusted during STOP and EJECT (see page 13).
y
RESET button
When this button is pressed, the counter display is
reset to 0:00:00.
u
Display panel
Cassete insertion display
Recording display
VTR operation Time mode
mode display display
•
Operation mode displays
Operation mode
Playback
Recording
Still picture
Recording pause
Recording check
Fast forwarding
Rewinding
Cue
Review
Forward field advance
Reverse field advance
the tracking is adjusted
External timer recording mode display
Internal timer recording mode display
Tape remaining display
Summer time display
Date setting
display
Time/counter
Memory stop mode display
Alarm search mode display
Auto repeat recording display
Recording lock display
Display
or
Rec lamp lights.
Rec lamp lights.
Rec lamp lights.
or (Flashing)
or (Flashing)
•
Error messages
An error code appears when trouble has
occurred during operation.
E-2: Trouble in video cassette insertion area
E-3: Trouble in video cassette tape loading area
E-4: Trouble in cylinder area
E-5: Trouble in tape transport area
d: Formation of condensation (dew)
i
TIME MODE ( ,
These buttons are used to select the recording and
playback time mode. Each time this is pressed, the
time mode changes in the following sequence:
3H
o
COUNTER/SEARCH selector button
When this button is pressed, the display on the
display panel changes to time, counter, counter
memory, alarm search and number of repeat
recording times. The M mark appears on the
display panel in the counter memory mode. When
the tape is fast forwarded or rewound in this mode,
the counter will automatically stop when 0:00:00 is
Time
approached. The AS mark appears on the display
display
panel in the alarm search mode. When the tape is
fast forwarded or rewound in this mode, the unit is
automatically set to still-picture playback at the
alarm recording section. If the FF button or REW
button is pressed during playback with alarm
search, the search will lock. (If this button is
pressed while the tape is being fast forwarded or
rewound, counter memory and alarm search will
not function.)
"** PAS" is displayed during repeat recording.
"_ _PAS" appears at all other times.
(where " ** " denotes the number of repeat times)
p
REC display lamp
This lamp lights while recording is in progress. It
goes off when recording has finished.
a
ALARM display lamp
This remains lighted while alarm recording is in
progress. It flashes when alarm recording ends.
For Swedish and Danish Customers
•
Aven om denna omkopplare är i "
fortfarande en del av apparaten nätspänning.
•
Selv om denne omskifter er i " " stilling, tiløres en
del af apparatet stadig strøm.
7
) buttons
6H 12H 24H
"-läge, gar