TRENDnet User's Guide
3. Click Finish to complete the driver installation
Now the installation is completed. You can connect the adapter to your USB
2.0/3.0 port then connect your network cable from the router to the adapter.
The Link LED should light up green to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn't light up, please
verify the cable connections between all the network devices.
You can also connect additional USB 2.0/3.0 devices to the Hub.
© Copyright 2014 TRENDnet. All Rights Reserved.
Mac OS 10.6/10.7/10.8/10.9 Driver Installation
1. Insert the provided driver CD into your CD‐ROM drive, browse to the MAC
folder. Double‐click <AX88179....pkg> to launch the setup procedure
2. When the Install AX88179/178A Adapter Driver screen appears, please select
Continue.
TU3‐ETGH3
4