Use The Bluetooth Adapter; Connect A Bluetooth Device - Philips AEA2700 User Manual

4 Use the
Bluetooth
adapter
Connect the Bluetooth adapter to your Hi-Fi
system with audio cable, and then you can
stream audio from your Bluetooth device to the
Hi-Fi system via Bluetooth.

Connect a Bluetooth device

Note
•
WOOX Innovations does not guarantee the
compatibility with all Bluetooth devices.
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility. Make sure that the
connected Bluetooth device supports the Advanced
Audio Distribution Profile (A2DP) and the Audio Video
Remote Control Profile (AVRCP).
•
The product can connect a maximum of 3 Bluetooth
devices simultaneously.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this product and a
Bluetooth device is approximately 10 meters (33 feet).
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
Bluetooth indicator
The LED Bluetooth indicator in the button
indicates the status of Bluetooth connection.
Indicator Bluetooth connection
Blinking blue in Connecting with a paired
1 Hz device
Blinking blue in Waiting for pairing
4 Hz
Solid blue Connected
Dim light Disconnected
6 EN
Enter Bluetooth pairing mode
• When connected to power, the Bluetooth
adapter tries to connect with the last
paired device. If no device is paired, the
Bluetooth adapter enters Bluetooth pairing
mode automatically.
• Afterwards press and hold for 2 seconds
to enter Bluetooth pairing mode.
Note
•
If Bluetooth pairing fails in 15 minutes, the Bluetooth
adapter exits the pairing mode.
Connect manually
1
Press and hold for 2 seconds to switch
this Bluetooth adapter to pairing mode.
» The Bluetooth indicator in the button
blinks in 4 Hz.
2
On your Bluetooth device, enable the
Bluetooth feature and search for devices.
3
In the device list, select PHILIPS AEA2700.
• If a message prompts for the
permission for Bluetooth connection
with PHILIPS AEA2700, confirm it.
• If a password is required, enter 0000
and then confirm.
Connect easily by NFC
If your Bluetooth device supports NFC (Near
Field Communication), you can connect it with
this product easily.
1
On your device, enable NFC and
Bluetooth functions.
2
Tap the back of your Bluetooth device at
the NFC tag on this product.
3
On your Bluetooth device, follow the on-
screen instructions to complete the pairing
and connection.