Contents 1 Important 2 Your Bluetooth Adapter Introduction What's in the box 3 Play Connect audio cables Connect power Enter pairing mode Play from Bluetooth-enabled devices 4 Product information Specifications 5 Troubleshooting About Bluetooth device 6 Notice Recycling...
1 Important 2 Your Bluetooth Adapter • Read these instructions. • Follow all instructions. • Do not use this apparatus near water. • Do not place near any heat sources such Introduction as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. By connecting the Bluetooth adapter to your •...
3 Play Connect power Caution Always follow the instructions in this chapter in • Risk of product damage! Make sure that the power sequence. supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! Hold the plug securely when Connect audio cables unplugging the device.
When [PhilipsBT] (Philips Bluetooth • If your Bluetooth device has been paired with the Bluetooth adapter before, press . adapter) is displayed on your device, » The Bluetooth adapter attempts to connect select it to start pairing and connection. If the previously connected Bluetooth device.
If the problem remains Specifications unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby Amplifier and the model number and serial number are Output Voltage 1000 mV RMS available.
The adapter is already connected with device that are not expressly approved by another Bluetooth-enabled device. Philips Consumer Lifestyle may void the user’s Disconnect that device and then try again. authority to operate the equipment. The paired device connects and disconnects constantly.