• Auto power down. Package Contents • PLL (Frequency Search). • PC input. • Plug&Play for Windows 98, ME, 2000, XP, Vista, Windows 7. • Game Mode. Introduction Thank you for choosing this product. This manual LCD TV will guide you through the proper operation of your TV.
Waste Disposal hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. Instructions for waste disposal: The power cord should be placed in such a way that they •...
a coaxial cable, may in some circumstances create Remote Control Handset a fire hazard. Inserting Batteries Connection to a cable distribution system has therefore to be provided through a device providing • Remove the battery cover located on the back of electrical isolation below a certain frequency range the handset by gently pulling backwards from the (galvanic isolator, see EN 60728-11).
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: •...
Remote Control Buttons Standby Image size / Zooms videos (in Media Browser video mode) Sleep Timer Mono/Stereo - Dual I-II / Currrent Language (*) (in DVB channels) Favourite channels Numeric buttons Electronic programme guide(in DVB channels) No function Media Browser Navigation buttons (Up/Down/Left/Right) No function No function...
TV and Operating Buttons FRONT and REAR VIEW Control switch VIEW Control Switch 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Connections - Back Connectors HDMI 2: HDMI Input HDMI 1: HDMI Input...
VGA Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input. SPDIF Out outputs audio signals of the currently watched source.
Switching On/Off To Switch the TV On • Connect the power cord to the 220-240V AC, 50 Hz. Then the standby LED lights up (The led will blink during the standby On/Off). • To switch the TV on from standby mode either: •...
Connecting to a DVD Player If you want to connect a DVD player to your TV, you can use the connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Note: If you connect a PC to the TV using HDMI Using USB Media connection, radio interference may occur. Therefore • You can connect USB devices to your TV by using this type of connection is not recommended. You the USB input of the TV. This feature allows you to should use VGA connection instead.
Basic Operations Viewing Electronic Programme Guide (EPG) You can operate your TV using both the remote control and onset buttons. You can view the electronic programme guide (EPG) Operation with the Buttons on the TV to see information about available programmes.To view the EPG menu please press EPG button on the Volume Setting remote control.
EPG Channel Schedule Installation Press MENU button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following menu screen will be displayed. / / / : Navigate Red button (Prev Time Slice): Displays the programmes of previous time slice.
Digital Manual Search Managing Stations: Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. • Press MENU button to view main menu.
Deleting a Channel Managing Stations: Favourites You can press GREEN button to tag/untag all You can create a list of favourite programmes. channels; YELLOW button to tag/untag channel. • Press MENU button to view the main menu. Select • Select the channel that you want to delete and select Channel List item by using “...
Viewing Videos via USB On-Screen Information You can press INFO button to display on-screen information. Details of the station and current programme will be displayed on the information banner. The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its channel When you select Videos from the main options, the list number.
Playing Music via USB Press SWAP button to switch back to previous menu. When you select Music from the main options, Viewing Photos via USB available audio files will be filtered and listed on this screen. When you select Photos from the main options, available image files will be filtered and listed on this screen.
Note: Backlight can not be activate in VGA or Configuring Picture Settings Media Browser mode or while picture mode is set You can use different picture settings in detail. as Game. Press MENU button and select the Picture icon by Noise Reduction: If the broadcast signal is weak and using “...
Sound Settings Menu Items Volume: Adjusts volume level. Equalizer: Press OK button to view equalizer sub- menu. Autoposition: Automatically optimizes the display. Press OK to optimize. H Position: This item shifts the image horizontally to right hand side or left hand side of the screen. V Position: This item shifts the image vertically towards the top or bottom of the screen.
Configuring Your TV’s Settings Using a Conditional Access Module (not included) Detailed settings can be configured to suit your personal preferences. IMPORTANT: Insert or remove the CI module only Press MENU button and select Settings icon by using when the TV is SWITCHED OFF. “...
Configuring Language Parental Control Preferences To prohibit viewing of certain programmes, channels and menus can be locked by using the parental You can operate the TV’s language settings using control system. this menu. This function enables or disables the menu protection Press MENU button and select the Settings icon by system and allows the PIN code to be changed.
Timers Configuring Date/Time Settings To view Timers menu, press MENU button and select Settings icon by using “ ” or “ ” button. Press OK Select Date/Time in the Settings menu to configure button to view Settings menu. Use “ ” or “ ” button Date/Time settings.
Menu Timeout: Changes timeout duration for menu Configuring Source Settings screens. You can enables or disable selected source options. The Scan Encrypted Channels: When this setting is on, TV will not switch to the disabled source options when search process will locate the encrypted channels as SOURCE button is pressed.
Other Features Teletext Displaying TV Information: Programme Number, The teletext system transmits information such as Programme Name, Sound Indicator, time, teletext, news, sports and weather on your TV. Note that if the channel type and resolution information is displayed signal degrades, for example in poor/adverse weather on the screen when a new programme is entered or conditions, some text errors may occur or the teletext “INFO”...
Tips Screen Care: Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom of the unit.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. Source Supported Signals Available The following table is an illustration of some of the typical video display modes.
Appendix D: Software Upgrade Appendix C: Supported DVI Resolutions • Your TV is capable of finding and updating new software upgrades over broadcast channels. When connecting devices to your TV’s connectors by • For broadcast channels search, the TV looks at the using DVI to HDMI cables (not supplied), you can refer available channels stored in your settings.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...
Features Contents Features ............... 32 General Properties General Properties..........32 • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG Safety Information ..........33 playback. Notes on Discs ............. 33 • NTSC/PAL playback (according to disc content) On handling discs ..........
On cleaning Safety Information • Before playing, clean the disc with a cleaning cloth. CAUTION Wipe the disc from the center out. DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure.
DVD Control Panel Buttons A. Stop / Eject Stop playing disc / Eject or Load the disc Note: • You cannot eject the disc via the remote control. • While playing a file, you should press STOP button three times to eject. B.
General Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons on the Movie Picture Music Remote Control Playback Playback Playback...
Reverse stepping is not available. General Playback For your convenience: Basic Play If you attempt to enter a number greater than the total Press on the power button time of the current title, the time search box disappears Please insert a disc to the loader. and “...
Preferences SPDIF OUTPUT DEFAULT You can set Spdif Output as PCM or RAW. If you select PCM from SPDIF Output in DVD menu and play DVD If you choose RESET and press OK, the factory- with Dolby audio, you can get audio output with two presets are loaded.
• These functions are not available on the DVD. potential to achieve double-sided play sometime in the future for even longer duration play. No picture Subtitles • Have you pressed the correct buttons on the remote control? Try once more. These are printed lines appearing at the bottom of the screen, which translate or transcribe the dialogue.
Need help?
Do you have a question about the 32914LCDDVD and is the answer not in the manual?
Questions and answers
How to delete sub titles