Sony VPL-SW630 Operating Instructions Manual page 36

(b) Input the settings for Client
Mode.
When the USB wireless LAN module is
activated as a client, set the items for the
client (set the items for the access point
the projector tries to connect to).
Connection Status: Displays the
connecting status between the access
point and projector.
ESSID: Input the ESSID of access point
the projector tries to connect to.
Encryption Type: Select the security
method of access point the projector
tries to connect to from the following
list.
Encyption
Type
Open
WEP 64bit
WEP 128bit
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES))
36
Using Network Features
3-(b)
Descriptions
Sets the security method
of the access point to open
system authentication.
Sets the security method
of the access point to
WEP (64bit).
Sets the security method
of the access point to
WEP (128bit).
Sets the security method
of the access point to
MIX. (corresponding to
both WPA-PSK (TKIP/
AES) and WPA2-PSK
(AES) security methods).
Encyption
Descriptions
Type
WPA2-PSK Sets the security method
(AES) of the access point to
WPA2-PSK (AES).
Key: Input the password for security
method of the access point according
to the selected encryption type as
below;
Encyption
Descriptions
Type
Open The password cannot be
input.
WEP 64bit Input 5 ASCII characters
for a password.
WEP 128bit Input 13 ASCII characters
for a password.
MIX (WPA- Input 8-63 ASCII
PSK/WPA2- characters for a password.
PSK (TKIP/
AES)) or
WPA2-PSK
(AES)
Obtain an IP address automatically:
Automatically provides the network
settings by a DHCP server function,
such as the router. The IP Address,
Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS
display the values provided by a
DHCP server.
Specify an IP address: Set the network
manually.
-IP Address: Input the IP address of the
projector.
-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
MAC Address: Displays the MAC
address for USB wireless LAN
module.