Replacing The Front Panel Card - Lenovo ThinkCentre 8290 Hardware Maintenance Manual

Replacing the front panel card

10. Reinstall the bezel. See "Removing and replacing the front bezel" on page 90.
11. Connect the front USB cable and the front audio cable to the system board.
12. Go to "Completing the FRU replacement." on page 109.
108
Hardware Maintenance Manual
1. Remove the left-side and right-side covers. See "Removing the covers" on
page 86.
2. Remove the front bezel. See "Removing and replacing the front bezel" on
page 90.
3. Disconnect the front USB cable and the front audio cable from the system
board. See "Identifying parts on the system board (Types 8290, 8291, and
8292" on page 89 or "Identifying parts on the system board (Types 9214, 9215,
and 9216" on page 90.
4. Remove the screw on each side of the chassis that secures the front panel
bracket.
5. Slide the front panel bracket out the front of the chassis.
6. Disconnect the front USB cable and the front audio cable from the front panel
card being replaced.
7. Connect the front USB cable and the front audio cable to the new front panel
card.
8. Slide the new front panel bracket into the chassis until the screw holes are
aligned.
9. Install the screw on each side of the chassis that secures the front panel
bracket.
See "Identifying parts on the system board (Types 8290, 8291, and 8292" on
page 89 or "Identifying parts on the system board (Types 9214, 9215, and
9216" on page 90.