Basic Operation - Pyramid PDVD78 Owner's Manual

BASIC OPERATION

FLASHING LED
If the front panel is not on the main unit, LED (16) will be flashing.
RESET BUTTON FUNCTION
RESET button (17) is placed on the housing and must be activated with
either a ballpoint pen or thin metal object. The RESET button (17) is to be
activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button (17), the unit can work yet, please use a cotton
swabsoaked in isopropyl alcohol to clean the socket on the back of the front
panel.
RADIO OPERATION
BAND
Press BND button (12) to change bands as below:
FM MV LW FM MW FM AM
For 3 Bands (Europe) For 2 Bands (Europe) For 2 Bands (USA)
SELECT STATION
Rotate TUNING knob (3) clockwise or anticlockwise to adjust the frequency
upwardor downward.
LOCAL/DISTANT
Press the LOC button (9) to select between local setting for reception of
strong station and distant setting for reception of weak stations when
tuning.
MONO/STEREO
In FM band, press MON button (8) to select mono or stereo reception for
radio stations.You can sometimes improve reception of distant stations by
selecting mono operation.
DISC OPERATION
Most of the disc operations are controlled by the remote controller.
Ejecting a Disc
Press (EJECT) button (15) on the front panel or button on the remote
control to eject the disc.
13