Pyramid PDVD78 Owner's Manual page 12

BASIC OPERATION
Volume
Adjust volume level by using VOL+ (12) and VOL- (11) buttons.
Note:The unit is initially set to volume mode.
Bass
Press SEL button (10) one time.Adjust bass level by using VOL+(12) and
VOL-(11) buttons.
Treble
Press SEL button (10) two times.Adjust treble level by using VOL+(12) and
VOL-(11) buttons.
Balance
Press SEL button (10) three times.Adjust sound balance between left and
right speakers by using VOL+(12) and VOL-(11) buttons.
Fader
Press SEL button (10) four times.Adjust sound balance between front and
rear speakersby using VOL+(12) and VOL-(11) buttons.
MUTE
Press MU button (4) to mute down sound.Press it again to release this mode
and recover previous volume level.
SELECT MODE
Press MOD button (9) to change between radio or disc mode.
EQUALIZATION
Press EQ button (5) to turn to equalization function and to select desired
audio mode. There are four kinds of mode as below:
FLAT CLAS ROCK POP NO EQ
LIQUID CRYSTAL DISPLAY
The LCD can show the current state of the unit
SKIP TRACKS
Press button(19)or button(18)to the previous track or the following
track .Track number shows on the display.
SELECT STATIONS
Press and release button(19)or button(18)immediately to move radio
frequency number down or up on step.
Press and hold button(19) or button(18)for several seconds to seek
thenext clear station.
FAST FORWARD AND FAST REVERSE
Press button(19) or button(18)to fast reverse or fast forward.
CD play starts from when you release the button.
12