Multiplexer Controls - Baxall Pyramid 2 Installation And Operating Instructions Manual

Table of Contents

Advertisement

Camera
1
Mux
1
Operator
Description
Icon
Press this soft-key to instruct the multiplexer to begin a sequence. The keyboard has no
control over the sequence itself (e.g., the camera order, dwell time etc) as it was
programmed and stored on the multiplexer itself.
If the unit is a simplex multiplexer, press this button to enter Encode mode (Record). Duplex
multiplexers are continuously in Encode mode.
Instruct the multiplexer to enter Decode mode (Playback).
Instruct the multiplexer to show live images in a multiscreen display.
Toggle through the different multiscreen displays that are available. The exact operation
of this soft-key depends on the make and model of the multiplexer.
Freeze all images on the multiplexer output monitor, whether the view is full-screen or
multiscreen.
Magnify (x2) the image on the multiplexer output monitor. Once the image has been
magnified, the joystick can be used to move around in side the image.
Next
Move to the second
Press a number key followed by this soft-key to recall a macro function (e.g., adjust screen
configuration, recall multiple presets etc). New macros cannot be produced using the
keyboard, as the macros are programmed and stored on the multiplexer itself.
On some multiplexers, a quad display will be shown when the soft-key is pressed, while on
other models, the soft-key will cause the multiplexer to cycle through its multiscreen options.
Press to enter Active Cameo mode. Once in this mode, use the joystick to move from one
cameo to another. Use the number keys and the
to place the required camera inputs into each cameo. To freeze individual cameos, use the
joystick to navigate to the required cameo and press the
Back
Return to the first
Monitor
1
Next
VCR / MUX
Operator Setup
Figure 37 - Multiplexer Control Screens
Multiplexer Control
Multiplexer Control
screen.
Figure 38 - Multiplexer Soft-keys
Camera
Monitor
1
1
Mux
1
Operator
VCR / MUX
Operator Setup
screen.
Camera
key (see
Freeze
soft-key.

MULTIPLEXER CONTROLS

Back
Selecting a Camera
)
Page 27

Advertisement

Table of Contents
loading

Related Products for Baxall Pyramid 2

Table of Contents