Using The Timers; Using Optional Equipment - Sony MHC-V3 Operating Instructions Manual

Using the timers

The system offers two timer functions. If
you use both timers, the Sleep Timer has
priority.
Sleep Timer
You can fall asleep while listening to
music. The system turns off after the
preset time.
Press SLEEP repeatedly.
To cancel Sleep Timer, press SLEEP
repeatedly to select "OFF".
Tip
To check the remaining time before the system
turns off, press SLEEP.
Play Timer
Make sure you have set the clock.
You can wake up to disc, tuner or USB
device at a preset time.
1
Prepare the sound source, then
press VOLUME +/– to adjust the
volume.
To start from a specific track or file,
create your own program (page 12).
2
Press CLOCK/TIMER SET.
3
Press ./> repeatedly to
select "PLAY SET", then press
ENTER.
4
Set the time to start playback.
Press ./> repeatedly to set the
hour/minute, then press ENTER.
5
Use the same procedure as in
step 4 to set the time to stop
playback.
6
Press ./> repeatedly to
select the sound source you
want, then press ENTER.
7
Press "/1 to turn off the system.
Note
If the system remains on, the timers will not
take effect.
To check the timer setting or
activate the timer again
Press CLOCK/TIMER SELECT, press
./> repeatedly to select "PLAY
SEL", then press ENTER.
To cancel the timer
Press CLOCK/TIMER SELECT, press
./> repeatedly to select "OFF",
then press ENTER.
Notes
• The system turns on before the preset time. If
the system is turned on at the preset time or if
"STANDBY" flashes in the display panel, the
Play Timer will not play.
• Do not operate the system from the time the
system turns on until the playback starts.
Using optional
equipment
1
Press VOLUME – repeatedly
until "VOL MIN" appears in the
display panel.
2
Connect an optional equipment
to AUDIO IN L/R jacks.
3
Press FUNCTION repeatedly to
select the AUDIO IN function.
4
Start playing the connected
equipment.
5
Press VOLUME + repeatedly to
adjust the volume.
23 GB