Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LA Fitness GK867
Summary of Contents for LA Fitness GK867
- Page 1 MAGNETIC BIKE Art No. GK867 Owner’s Manual...
-
Page 2: Safety Instructions
Safety Instructions This exerciser has been designed for home use only. Professional use, commercial or use in gym centers, will automatically cancel the manufacturers’ and/or importers’ product liability. Before you start training on your exerciser, please read the instructions carefully. Be sure to keep the instructions for information, in case of repair and for spare part delivery. - Page 3 Warming Up: 15 seconds for each 20 seconds 20 seconds 25 seconds 20 seconds 20 seconds 30 seconds 25 seconds for each lag 30 seconds 20 seconds 5 seconds x 3 times 20 seconds 20 seconds for each leg 5 times 15 seconds...
-
Page 4: Assembly Instruction
Assembly Instruction Step One: Fix the Front bottom tube (2) and the Rear bottom tube (3) onto the Main frame (1) with the Allen pan head screw (7) and the Curved washer (6) as shown. Step Two: Attach the Left/Right pedal (37L/R) to the Crank (38) of the Main frame (1). Note: The Left pedal (37L) should be tighten in the counterclockwise direction, the Right pedal (37R) should be tighten in the clockwise direction. - Page 5 Step Three: Attach the Saddle (29) to the Saddle slider (30) with the Knob nut (33) and the Flat washer (32).Insert the Saddle post (34) into the post of Main frame (1), and then fix it with the Pop-pin Knob (36) after adjusting to a suitable height. Step Four: 1.Insert the Handlebar post cover (14) into the Handlebar post (4) and then connect the Connection wire (11) well with the Sensor wire (9), and finally connect the Tension wire (10)
- Page 6 Step Five: Pull the Pulse sensor wire (20) out of the console bracket hole of the Handlebar post (4). Adjust the Handlebar (21) to a suitable position and then fix it on the Handlebar post (4) with Handlebar chuck cover (24), the spacer (23), the Flat washer (22) and T shape bolt (25) Step Six: Connect the Pulse sensor wire (20) and the Connection wire (11) with the wires of console...
-
Page 7: Console Instructions
Console Instructions 9207B SPECIFICATIONS : TIME : 00:00 - 99:59 MIN:SEC SPEED : 00:00 - 99:59 MIN:SEC 0.00 – 99.99 KM OR ML DISTANCE : 0.0 – 999.9 KCAL CALORIES : 0.00 – 99.99 KM OR ML ODOMETER(if have) : PULSE(if have) : 40 - 200 BEATS/MIN KEY FUNCTION :... - Page 8 FUNCTION : TIME (TMR) Auto-memorize the workout time while exercising. Display the current speed SPEED (SPD) DISTANCE (DST) Accumulate the distances while exercising. CALORIES (CAL) Auto-memorize calories amount consumed while exercising. ODOMETER (TOTAL) Display the total distances while exercising. (if have) When the signal input, it start the value up on the original data.
-
Page 9: Exploded View
Exploded view... - Page 10 Exploded view...
-
Page 11: Part List
Part List NO. DESCRIPTION DESCRIPTION Main frame Handlebar Chuck Cover Front bottom tube T shape Bolt M8×65 Rear bottom tube End cap Handlebar post Foam Grip Rear end cap Console Curved washerΦ8×Φ25×R33 Saddle Allen pan head screwM8*75 Saddle Slider Front end cap End cap Sensor wire Flat washer D10... - Page 12 Part List NO. DESCRIPTION QTY NO. DESCRIPTION Collar housing Cone thin nut M10×1 Bushing Φ10×Φ16×3 washer Bearings 6000Z Belt pulley Fly wheel Spacer Φ13×1.2×56.8 belt Bolt M5X60 Flywheel axle Nut M5 Thin nut M10×1 Nylon nut M8 Screw M6x15 Spring washer D8 Flat washer D6 Idle wheel Magnetic board...
Need help?
Do you have a question about the GK867 and is the answer not in the manual?
Questions and answers