Asus K8S-LA (Salmon) User Manual page 18

3 . 3 . 3 . 3 . 3 . ATX power connectors (2 ATX power connectors (2 ATX power connectors (20 0 0 0 0 -pin ATXP ATX power connectors (2 ATX power connectors (2
These connectors are for ATX power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
•
•
•
K8S-LA ATX power connectors
1 4 1 4 1 4 1 4 1 4
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB).
The minimum recommended wattage is 230W, or 300W for a fully
configured system. The system can become unstable and might
experience difficulty powering up if the power supply is inadequate.
You must install a PSU with a higher power rating if you intend to
install additional devices.
K8S-LA
-pin ATXPW R 1 -pin ATXP -pin ATXP -pin ATXP W R 1 W R 1 W R 1, 4-pin ATX12V W R 1 , 4-pin ATX12V , 4-pin ATX12V , 4-pin ATX12V1 1 1 1 1 ) ) ) ) ) , 4-pin ATX12V
ATX12V1
+12V DC +12V DC
GND GND
A S U S K 8 S - L A ( S a l m o n ) A S U S K 8 S - L A ( S a l m o n ) A S U S K 8 S - L A ( S a l m o n ) A S U S K 8 S - L A ( S a l m o n ) A S U S K 8 S - L A ( S a l m o n )
ATXPWR1
+12.0VDC
+5.0VDC
+5VSB
+5.0VDC
PWR_OK
-5.0VDC
COM
COM
+5.0VDC
COM
COM COM
+5.0VDC
PS_ON#
COM COM
+3.3VDC
-12.0VDC
+3.3VDC +3.3VDC