Viewing The Control Panel (Panel Key) - Samsung 8+ series User Manual

The product colour and shape may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom left side of the TV, lets you control the
✎
TV without the remote control.
Remote control sensor
Follow these instructions facing the front of your TV
✎
When you use a TV camera, you should check whether a tape attached or not in rear of the TV
✎
camera, and then you can use a TV camera after adjust a camera angle. When you don't use a TV
camera, we recommend to use after a camera lens fixes to forwards. In this case, Face recognition
and Motion control functions is not available.
Power on
Adjusting the volume
Selecting a channel
Using the function
menu
Selecting the Menu (m) With the Function menu visible, select the MENU (m) by moving the
Selecting the SMART
HUB (™)
Selecting the Source
(s)
Power off (P)
To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.
✎
When selecting the function by moving the controller to the forwards/backwards/left/right directions,
✎
be sure not to press the controller. If you press it first, you cannot operate it to move the forwards/
backwards/left/right directions.

Viewing the Control Panel (Panel Key)

Function menu
m R
P
Down (Front)
Left Right
TV Controller
Up (Rear)
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusts the volume by moving the controller from side to side when the power
is on.
Select a channel by moving the Controller backwards and forwards when the
power is on.
To view and use the Function menu, press and release the Controller when
the power is on. To close the Function menu, press and release the Controller
again.
Controller to the left. The OSD (On Screen Display) Menu appears. Select an
option by moving the Controller to the right. Move the Controller to the right
or left, or backwards and forwards to make additional selections. To change a
parameter, select it, and then press the Controller.
With the Function menu visible, select SMART HUB (™) by moving the
Controller backwards. The SMART HUB main screen appears. Select an
application by moving the Controller, and then pressing the Controller.
With the Function menu visible, open the Source (s) by pushing the
Controller to the right. The Source screen appears. To select a source, move
the Controller back and forth. When the source you want is highlighted, press
the Controller.
With the Function menu visible, select Power off (P) by pulling the Controller
forwards, and then press the Controller.
English - 6
Camera