Additional Features; Time Search; Marker Search; Last Scene Memory - LG LH-E9674PA Owner's Manual

Notes on general features:
If you press SKIP (>) once during Repeat
Chapter (Track) playback, the repeat playback
cancels.
Zoom may not work on some DVDs.
The A-B repeat function is available only in the
current track.

Additional features

Time Search

DVD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
"--:--:--" appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.

Marker Search

DVD
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
26
VCD DivX
VCD DivX

Last Scene Memory

DVD
This receiver memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the receiver or
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.

Sleep Timer Setting

You can set the DVD Home Theater System to turn off
automatically at a specified time.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears in the
display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 →
30 → 20 →10 →OFF
Note:
You can check the time remaining before the DVD
•
Home Theater System turns off.
Press SLEEP. The remaining time appears in the
display window.

Dimmer

This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Button's light turn off → Display window make din →
Display window and Button's light are on

Mute

Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, "MUTE" indicator flashes in the
display window.
Press MUTE again or adjust the volum to release it.

Using Headphone Jack

Connect a stereo headphone plug ( 3.5mm) into the
PHONES connector.
The speakers are automatically disconnected when
you plug in a headphone (not supplied).