Audio; 5.1 Speaker Setup - LG LH-E9674PA Owner's Manual

AUDIO

Each DVD disc has a variety of audio output options.
Set the receiver's AUDIO options according to the
type of audio system you use.
AUDIO

5.1 Speaker Setup

DRC
Vocal
HD AV Sync
HDMI Audio
Dynamic Range Control (DRC)
With the DVD* 1 format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
*1: Dolby Digital only
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync
You can adjust deley time between a Audio signal and
a Video.signal.
→ →
000 010 020
HDMI Audio
Selet output sound with TV or this unit of speakers.
22
Select
On
On
000
Speaker
Move Select
→... →
300
5.1 Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press ENTER and 5.1 Speaker Setup menu
appears.
AUDIO
Speaker Front L
Size
Small
dB
Volume 0
Distance m(ft)
0
Test Off
Select Move
2. Use b / B to select the desired speaker.
3. Adjust options using v / V / b / B buttons.
4. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press b / B to adjust the output level of the selected
speaker. (-5dB ~ 5dB)
Distance
If you connected speakers to your unit, setting the
Distance lets the speakers know how far the sound
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the
listener at the same time.
Press b / B to adjust the Distance of the selected
speaker. (You can't adjust front / Woofer speakers)
Test
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Center → Front Right (R) →
Rear Right (R) → Rear Left (L) → SubWoofer
Return Enter