Power Up The Mrc-6430; Programming - Niles MRC-6430 Installation Manual

Multi RooM contRolleR

9. pOwER Up THE mRC-6430

Plug in the MRC-6430 using the correct IEC power cord for your region.
Engage the Main Power switch on the rear and press the Standby Power Button
on the front to turn the unit on. When the MRC-6430 is in Standby mode,
the button dims and the internal amplification and controller are shut down.
In Standby mode the MRC-6430 will not respond to any external commands
and will not provide any user interface screens. Activate the internal controller
by pressing the Standby Power Button on the front panel.
UPDATE 5: 02/28

10. pROGRAmmING

Before programming please read the Auriel Wizard Programming Manual
TM
MRC_6430
and watch the training videos, both of which may be found by visiting:
www.NilesAudio.com/AurielSupport
These assets should be checked with each new software release
as features are added to the MRC-6430 regularly.
The Niles MRC-6430 is programmed using the wizard based Niles Auriel
TM
PC and MAC viewer found on the Niles website (www.nilesaudio.com), or the
Niles Auriel App found on either the Android Play market or iTunes app store.
TM
13
NILES AUDIO – 1-800-BUY-HIFI – 1-707-778-5733