Table of Contents
Advertisement
Problem
Appliance does not work.
Buttons do not work
Drying repeatedly starts
and stops.
Laundry is not sufficiently
dried. (Some portions are
damp.)
- The fuse may have blown out or breaker may have
tripped.
- The mains plug may not be connected firmly to the
mains socket.
- The On button may have not been pressed.
- The Start button may have not been pressed.
- The door may not be closed properly.
- Settings cannot be changed while drying is in progress.
To change settings, switch the appliance off and on
again. Then, set the settings again.
- Child Lock may be activated. (See page 9.)
- This is not a malfunction; the drum slowly rotates and
stops repeatedly when the "Anti-crease" function has
been set.
- The laundry might have been added to the drum during
drying.
- The laundry may have become tangled.
- The laundry may be too heavy.
- Try using the Warm Timed programme (Timed Prog.
Warm) for small synthetic fibre loads, or dry them
together with large items of clothing.
- The moisture sensors may be dirty. (See page 18.)
Fault Checklist
Cause
Troubleshooting - 21
Hide quick links:
Advertisement
Table of Contents
