Technical Specifications - Jacuzzi Bellavista 6 Specifications

Bellavista 6
™
pure air® ii Bath
Bellavista™ 6 Pure Air® II Bath, Right Hand
Y850
(Includes a required drain/actuator kit in chrome)
• Center Drain Location
• Accessories / Hardware:
Trim Kit Rotary: #BN21
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
72"
18" x 4"*
42"
3"
Optional Service Access
10-1/2"
product Shown: Bellavista™ 6 pure air® ii Bath
right hand Shown, model: Y850
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
L
SIDE VIEW
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
12" H x 18" L
Blower
Service Access
30-1/8"
11-3/4"
6"
35-13/16"
2"
(51 mm)
H
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.

technical Specifications

DimenSionS
72" L x 42" W x 26" H
(1829 mm) L x (1067 mm) W x (660 mm) H
Drain/overflow
A: 20" (508 mm) B: 11-3/4" (298 mm)
Cutout
Template Provided P/N P187000
total weight
1130 lb (513 kg) / 54 lb/sq. ft. (264 kg/m
operating gallonage
90 U.S. Gal. (341Liters)
Min. 75 Gal. (284 Liters)
Max. 98 Gal. (371 Liters)
proDuCt weight
130 lb (59 kg)
Skirt mounting
Not Available
eleCtriCal SpeCifiCationS
requires a dedicated gfCi protected separate circuit.
Blower: 120 VAC, 15 AMP , 60 Hz.
heater
No water heater is available on this unit. Blower has integral air heater.
W
(Blower)
END VIEW
2 )
A
B
DRAIN/OVERFLOW
#FR17000 10/07