Unit Data; Display - Blackspot Interactive Road Angel Plus User Manual

Standalone, cable-free, gps camera and accident black spot locator
Table of Contents

Advertisement

Unit Data

This menu provides technical information about your ROAD ANGEL Plus:
its serial number and firmware version.
No
Property
4-0
Unit serial number
4-1
Firmware version

Display

Using this menu, you can change the appearance of the display: its
contrast and the speed units in use. You can also adjust the clock to take
account of daylight saving time and enable or disable the intelligent
backlight option (see page 17).
Note: You cannot adjust the brightness of the display – use the visor to
shade the display from bright sunlight (see page 13).
No
Property
5-0
Contrast
5-1
Speed units
5-2
Clock adjust
Intelligent
5-3
backlight
28
Details
Serial number of ROAD ANGEL
Plus unit
ROAD ANGEL Plus firmware
version
Details
Adjust the contrast of the ROAD
ANGEL Plus display.
Change displayed speed between
mph and km/hr
Change time – ROAD ANGEL Plus
uses GPS data; may require offset
to account for daylight saving time.
Maintains blue backlight (instead of
red warning colour) when
approaching camera location if
vehicle speed is below advisory
speed limit
Options
(factory setting
shown in bold)
Read only; 8 digit number
Read only, in format x.xx
Options
(factory setting
shown in bold)
0 – 19 (10)
MPH....KMH
± 20 hours in ½ hour
intervals. (+1.00)
On ... Off

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents