Indiglo Night-Light; Resetting The Watch; Settings/About Menu; Downloading Workout Data And Reviewing On Your Computer - Timex Ironman Run Trainer 2.0 GPS User Manual

InDIGlo nIGhT-lIGhT
®
• Press the INDIGLO button to activate the night-light for a few seconds.
®
• Hold the INDIGLO button until the watch beeps once (about four seconds) to activate Night-Mode
®
about eight hours. While Night-Mode
seconds.
• Hold the INDIGLO button until the watch beeps twice (about six seconds) to activate Constant On. The
®
night-light stays on for seven to eight hours. Press INDIGLO

ReseTTInG The WaTCh

If your watch buttons become inoperable, you can reset the watch back to working order while maintaining
almost all of your settings and workout data.
• Simultaneously press all four "corner" buttons (, , BACk, and INDIGLO) for three seconds until the
TIMEx name appears. The watch will reset, and the Time and Date will need to be set.
noTe: All of the watch's stored data and remaining settings will remain unaffected.

seTTInGs/abouT Menu

You can reset the watch back to the default state. The watch settings will all revert back to the default settings
for the firmware version indicated on your watch. All saved workouts are deleted.
1. From the SETTINGS menu, open ABOUT.
2. Select FACTORy RESET.
3. Select yES.
The next time you press a button after resetting the watch, first-time setup will begin.

DoWnloaDInG WoRkouT DaTa anD RevIeWInG on youR CoMPuTeR

Download workout data to the free online log powered by TrainingPeaks
training regimen.
1. Create a TrainingPeaks
™
http://TimexIronman.com/DeviceAgent
2. Connect the charging clip to the watch, then plug the USB cable into the computer.
3. Open the Device Agent on your computer.
2.0 from the Device field, and make sure your account is selected in the username
4. Select the Run Trainer
™
field.
noTe: Add your new account to the Device Agent by clicking file, then edit login accounts. Click on the
"+" in the Manage user accounts window to add your new account information.
5. Click Open Files to display the workouts in the Activities List.
6. Hold the SHIFT key and click to highlight the files you want from your watch. Click Ok.
7. Leave the boxes checked for those workouts you want sent to your online account and click Save.
8. When the workout transfer is complete, click login to enter the online log, or close the Device Agent
and unplug the watch from the computer.
is active, press any button to activate the night-light for a few
™
account at:
again to turn off the night-light.
®
to help you analyze and plan your
™
23
for
™