Safety Belt Warning Lamp And Indicator Chime; Safety Belt Minder - Ford Mustang 2015 Owner's Manual

In addition, the retractor is designed to lock
if the webbing is pulled out too quickly. If
this occurs, let the belt retract slightly and
pull webbing out again in a slow and
controlled manner.
Safety Belt Extension Assembly
WARNINGS
Do not use extensions to change the
fit of the shoulder belt across the
torso.
Do not use extensions with an
inflatable safety belt.
If the safety belt is too short when fully
extended, a safety belt extension assembly
can be obtained from an authorized dealer.
Conditions of operation
The driver's safety belt is not buckled
before the ignition switch is turned to the
on position...
The driver's safety belt is buckled while the
indicator light is illuminated and the
warning chime is sounding...
The driver's safety belt is buckled before
the ignition switch is turned to the on posi-

SAFETY BELT MINDER

Belt-Minder
This feature supplements the safety belt
warning function by providing additional
reminders that intermittently sound a tone
and illuminate the safety belt warning light
when you are in the driver seat or you have
a front seat passenger and a safety belt is
unbuckled.
Mustang (), enUSA, First Printing
Safety Belts
If...
tion...
Use only extensions manufactured by the
same supplier as the safety belt.
Manufacturer identification is on a label
located either at the end of the webbing
or on the retractor behind the trim. Also,
use the safety belt extension only if the
safety belt is too short for you when fully
extended.
SAFETY BELT WARNING LAMP
AND INDICATOR CHIME
This lamp illuminates and an
audible warning will sound if the
driver's safety belt has not been
fastened when the vehicle's ignition is
turned on.
The safety belt warning light illuminates 1-
2 minutes and the warning chime sounds
4-8 seconds.
The safety belt warning light and warning
chime turn off.
The safety belt warning light and indicator
chime remain off.
The system uses information from the
front passenger sensing system to
determine if a front seat passenger is
present and therefore potentially in need
of a warning. To avoid activating the
Belt-Minder feature for objects you place
in the front passenger seat, only the front
seat passengers receive warnings as
determined by the front passenger sensing
system.
32
Then...