Interrupting A Program; Changing A Program - Miele G 681 Operating Instructions Manual

Interrupting a program

A program is interrupted as soon as the
door is opened.
When the door is closed, the program
will continue from the point it was at be-
fore the door was opened.
Warning:
Water in the dishwasher may be
hot. There is a danger of being
burned!
Only open the door if absolutely
necessary and with extreme cau-
tion. Before closing the door,
leave ajar for approximately
20 seconds. This will allow the
temperature in the wash cabinet
to settle. Close the door firmly
until it clicks into place.
Operating the dishwasher

Changing a program

If a program has already started and
you wish to change it proceed as fol-
lows:
^ Turn the program selector (18) to the
"Stop" position.
^ Leave the program selector (18) in
this position for at least one second.
^ Then turn the program selector (18)
to the program you wish to use.
^ Press the "Start" button (21).
The program starts.
35