Table of Contents
Advertisement
Available languages
Available languages
Adjust Settings
Introduction
This chapter describes how to use the SETUP
menu. Most settings and adjustments are required
to be set when you first use the system.
1
Press the SETUP button.
2
Press the
,
buttons to select a setup page.
3
Press the
,
buttons to select an option and
then press the
button.
4
Press the
,
buttons to select a setting and
then press the ENTER button .
-
To return to the previous menu, press the
button.
-
To exit the menu, press the SETUP button.
General Setup Page
TV Display
The shape of the television or monitor may not
match the shape of the movie frame. To avoid
distortion on older televisions, you may need
to change the way in which the image is displayed.
Televisions use a 4:3 aspect ratio; high-definition
televisions use 16:9 aspect ratio (as do movies).
Note:
You may need to read your television's manual
in conjunction with this section in order to achieve
the best results. Some discs do not allow the
aspect ratio to be changed and you will therefore
have to change the aspect ratio on the TV.
Make this setting while playback is stopped; you
cannot do this while playing a disc.
NORMAL/PS
This mode is used with 4:3 televisions.
4:3 images are displayed normally. When show-
ing 16:9 programmes, the full height of the
screen is displayed, and the left and right part of
the image are cut off.
NORMAL/LB
This mode is used with 4:3 televisions.
4:3 images are displayed normally. 16:9 images
are visible at their full width, but there are blank
areas at the top and bottom of the screen.
WIDE
Use with a 16:9 wide television.
OSD (On Screen Display) Language
Select the desired language for displaying
all on-screen menus.
CLOSED CAPTIONS
On/Off
Turns on/off the CC subtitle when playing a
DVD. Some DVDs may not support this option.
Screen Saver
On
The screen saver starts up if nothing is playing
and no operations are performed for 4 minutes.
Off
The screen saver does not start up.
Last Memory
On
Select this to make last memory function
available.
Off
Select this to disable the last memory function.
Audio Setup Page
Downmix (Analog Audio)
LT/RT
5.1 channel audio is mixed into left channel and
right channel and is output via FL and FR speak-
ers respectively.
Stereo
5.1 channel audio is mixed into stereo signal and
is output via the FL and FR speakers.
Off
Select this to disable this function.
Note:
Only for Dolby AC-3 encoded 5.1- channel discs.
Reverb Mode (3D Processing)
This setting provides the following sound effects:
Off, Concert, Living Room, Hall, Bathroom,
Cave, Arena, Church
Video Setup Page
Quality
You can adjust some parameters of video picture.
1
Highlight "Quality" and press the
2
Use the
Sharpness
This adjusts the sharpness of the picture shown
on the monitor.
Select High, Medium or Low using the Cursor
buttons, and press the ENTER button.
Brightness
This adjusts the brightness of the picture.
Use the left and right buttons to change the
value, and press the ENTER button.
Contrast
This adjusts the picture's contrast.
Use the left and right buttons to change the
value, and press the ENTER button.
Gamma
This adjusts the gamma value of the picture.
Select High, Medium, Low or None using the
Cursor buttons, and press the ENTER button.
12
/
buttons to select the parameter.
button.
Advertisement
Chapters
Table of Contents
