Table of Contents
Advertisement
1. Execute Backup Utility:
Press B to Backup your System or Esc to Exit
The Backup utility will scan the system automatically and back it up.
The backed up data will be saved as a hidden image.
2. Execute Restore Utility:
This program will recover your system to factory default.
Press R to recover your system.
Press Esc to exit
Restore the backup image to the original state.
3. Remove Backup Image:
Are you sure to remove backup image? (Y/N)
Remove the backup image.
4. Set Password:
Please input the password(a~z or 0~9) or press ESC to exit.
This password must 4-16 characters.
You can set a password for Xpress Recovery to protect your hard disk data. Once this is done, password
input will be required to enter Xpress Recovery during the next system restart. If you wish to remove the
need for password entry, please click "Set Password" and under New Password/Confirm Password, make
sure there is no entry and then click "Enter" to remove this step.
5. Exit and Restart:
Exit and restart your computer.
- 75 -
Technical Reference
Advertisement
Table of Contents
