Power Management Setup - Gigabyte GA-K8NS User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
ACPI Suspend Type
Soft-Off by PWR-BTTN
PME Event Wake Up
Modem Ring On
S3 Resume by USB device
Resume by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
x KB Power ON Password
AC Back Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
S3(STR)
Soft-Off by PWR-BTTN
Instant-off
Delay 4 Sec.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Enabled
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled
Enabled
S3 Resume by USB Device
Disabled
Enable
Resume by Alarm
You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on system.
Disabled
Enabled
If RTC Alarm Lead To Power On is Enabled.
Day of Month Alarm :
Time (hh: mm: ss) Alarm :
GA-K8NS Motherboard
Power Management Setup
[S1(POS)]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F6: Fail-Save Default
Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
Set ACPI suspend type to S3/STR (Suspend To RAM).
Press power button then power off instantly. (Default value)
Press power button 4 seconds to power off. Enter suspend if button is
pressed less than 4 seconds.
Disable this function. (Default value)
Enable PME as wake up event.
Disable Modem Ring on function. (Default value)
Enable Modem Ring on function.
Disable this function. (Default value)
Enable USB device wake up system from S3 suspend type.
Disable this function. (Default value)
Enable alarm function to POWER ON system.
Everyday, 1~31
(0~23) : (0~59) : (0~59)
- 44 -
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help