Advertisement
Step Three
With the Stand
1. Hold the antenna upside down
and align the key on the stand
with the slots on the antenna as
shown. Make sure you place the
antenna wires so they are not
pinched between the stand and
antenna.
2. Slide the stand downward
until it stops.
3. Route the antenna's AM and
FM wires through the stand's
wire guides as shown.
4. To detach the stand, slide it
off the antenna.
FCC Information
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation
Product:
Model:
Responsible Party:
Phone:
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your local RadioShack store or an experienced radio/TV technician for help.
• If you cannot eliminate the interference, the FCC requires that you stop using your antenna.
Changes or modifications not expressly approved by RadioShack may cause interference and void the user's authority to operate the equipment.
Stand
On the Wall
Align
1. Drill two holes in the wall, about 3
2. Thread the
Antenna
Route the AM
wire through
narrow wire guide
3. Align the
Route the FM wire
through wide
wire guide
Amplified AM/FM
Antenna
15-1859
RadioShack
100 Throckmorton
Fort Worth, TX 76102
817-415-3200
1
Wall
supplied
screws into
each hole,
letting the
heads extend
5
about
/
-inch
16
from the wall.
antenna's keyhole slots with the screws, and slide
the antenna down.
.
Specifications
Reception .............................. FM and AM
Operating Band .......... FM 88 to 108 MHz
/
inches apart.
3
Antenna
Polarization ................................... Vertical
Power Source.... 120V AC, 60Hz/12V DC,
FM Gain ................................. 10 dB Min.
FM Gain Control ............... –15dB to 15dB
FM Noise Figure....................3 dB Normal
Dimensions ........5
Weight ................................7.94 oz (225g)
Specifications are typical; individual units
might vary. Specifications are subject to
change and improvement without notice.
Limited 90-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship
under normal use for ninety (90) days from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN,
RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN.
EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR
DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE,
OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales
receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless
otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b)
replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made, become the property of RadioShack. New
or reconditioned parts and products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original warranty period. You will be
charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other
than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or
batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product
removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
©2003. RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.
AM 500 to 1700 kHz
100mA AC Adapter
10 dB Max
1
15
5
/
x 5
/
x 2
/
Inches
2
16
8
(140 x 152 x 67 mm)
12/99
15-1859
Printed in China
11A03
Advertisement
