Multi Shot 3D - Panasonic TH-42AS700A User Manual

Multi Shot 3D

This TV can create a 3D photo using a pair of photos and save it.
You can only save the image into the SD card.
●
This function is available with photos recorded on digital cameras.
●
Depending on the photos you select, they may not be suitable for creating
●
3D photos, or creating 3D photos may not be possible. In this case, it is
recommended to take a photo (for L) and then move your camera to the
right approx. 5 cm and take another photo (for R).
To view the created 3D photo with 3D effect, you need the 3D Eyewear.
●
1. Display the option menu in the thumbnail view with OPTION.
2. Select Multi Shot 3D
3. Select two photos for
(red).
You can only select photos of the same recorded date and the same
●
pixels.
You may not be able to view the created 3D photo properly if you
●
transpose the left and right photos.
4. Create the 3D photo with OK.
If your selected photos are not suitable for the 3D photo, the error
●
message will be displayed and you will return to the photo selection
screen (step 3).
To save the 3D photo in the SD Card, press
●
screen instructions.
After the photo is saved, the photo selection screen will be displayed
●
(step 3). Select photos again to create another 3D photo or exit from
Multi Shot 3D.
■
To enjoy the saved 3D photos
Saved 3D photos are displayed in the thumbnail view. Wear the 3D Eyewear
and enjoy the 3D photos.
with / and press
L (left) and R (right) with
- 87 -
OK to access.
/ / / and
OK and follow the on-