Setting For Usb Hdd - Panasonic TH-42AS700A User Manual

The data recorded on the USB HDD with this TV can only be played back
●
on this TV. You cannot play back its contents with another TV (including
the TV of the same model number) or any equipment.
Do not turn the TV off, pull out the mains plug or remove the USB HDD
●
during operation (formatting, recording, etc.). Doing so may cause
malfunction of the device or damage the recorded data. (An electric
outage may also be a cause of malfunction.)
= Note =
Analogue TV programme cannot be recorded on the USB HDD.
●
The data broadcasting (MHEG, etc.), radio broadcasting will not be
●
recorded, and also the recording function will not work during the period
without any signal.
Not all the programmes can be recorded depending on the broadcaster
●
and service provider.
You cannot copy the recorded TV programmes of the USB HDD.
●
For more information of the USB HDD
●
Recording > Technical information > USB HDD

Setting for USB HDD

Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device will be listed.
Please note that USB HDD will be formatted and all data in it will be
●
erased after this setup.
Before setting, connect the USB HDD and be sure to turn on the USB
●
HDD.
Recording > USB HDD setup > Preparations
1. Display the menu with MENU.
2. Select Setup > USB Device Setup
3. Select the USB HDD for recording with
Some USB HDD may not be displayed.
●
To display information of the highlighted device
●
INFO
4. When the caution and confirmation screen for using USB HDD is
displayed, select
with
Yes with / and press
- 69 -
/ and press OK to access.
/ and press OK to start setup.
OK to proceed.