Powering The Device On/Off; Daily Use; Powering Off Completely - Targa PNA-E3520 User Manual And Service Information

The external antenna must have an MMCX connector in order to connect it to
the corresponding receptacle [page 14, item 9] on the navigation device.
The device will receive the signals from the additional antenna automatically:
no further settings are required.
2.11

Powering the Device On/Off

To power the device on for the first time, slide the main power switch [page 14,
item 7] into the On position.
On delivery, the battery of your navigation device is not fully
charged. Recharge the battery completely. The device can charge
the battery also while it's powered off.
2.11.1

Daily Use

To power the device off, press and hold the On/Off button [page 14, item 2] for
approx. 3 seconds. The navigation device will switch to standby mode.
To power the navigation device on the next time, press and hold the On/Off
button for approx. 3 seconds. The device will resume power with the last
opened application.
The device consumes electricity in the standby mode. Therefore it
can discharge the battery when in standby mode over a longer
period of time.
2.11.2

Powering Off Completely

To power the device off completely, slide the main power switch [page 14, item
7] into the Off position.
When powering the device off by using the main power switch, all parameters
and custom settings will be saved.
Navigation Device PNA-E3520/PNA-E3520T
Powering the Device On/Off
25