Powering The Device On/Off; Daily Use; Powering Off Completely - Targa PNA-E3540N User Manual And Service Information

2.8

Powering the Device On/Off

To power the device on for the first time, slide the device's On/Off switch
[page 14, item 1] from the center position to the ON position and hold it there
for a few seconds. Then release the On/Off switch. The switch will return to the
center position and the device powers on.
On delivery, the battery of your navigation device is not fully
charged. Recharge the battery completely. The device can charge
the battery also while it's powered off.
2.8.1

Daily Use

To power the device off, slide the On/Off switch [page 14, item 1] from the
center position to the ON position and hold it there for a few seconds. Then
release the On/Off switch. The switch will return to the center position and the
device will go to stand-by. All entered information and settings will be saved.
The next time you want to power the device back on, simply slide the On/Off
switch to the ON position. The device will resume power with the last opened
application.
The device consumes electricity in the standby mode. Therefore it
can discharge the battery when in standby mode over a longer
period of time.
2.8.2

Powering Off Completely

To power the device off completely, slide the On/Off switch [page 14, item 1]
into the OFF position. This will not save any changes.
Navigation Device PNA-E3540N
Powering the Device On/Off
23