Disc - Basic Play; Loading A Disc; Playing A Disc; Normal Play - Sony CMT-DX400 Operating Instructions Manual

Disc – Basic Play

Loading a disc

1
Press
Z
2
Place the disc on the disc tray.
Playback side
facing down.
3
Press N.
The disc tray closed. The player starts
playback.
Note
• Do not use a disc with tape, seals or paste on it as this
may cause malfunction.
To save power in standby mode
Press "/1 while the system is on. The system
enters power saving mode.

Playing a disc

— Normal Play

Before playing a DVD or VIDEO CD, turn on
your TV and select the video input. Depending
on the DVD or VIDEO CD, some operations
may be different or restricted. Refer to the
operating instructions supplied with the disc.
Example: When playing a DVD
Chapter number
GB
10
on the unit.
Playing time
Example: When playing a CD
Track number
1
Press FUNCTION +/– repeatedly to
switch the function to DVD/CD.
Playback starts automatically if a disc with
auto playback function is loaded.
2
Load a disc.
Playback starts automatically when you
close the disc compartment.
If the playback does not start automatically,
press N.
Other operations
To
Stop
Pause
Resume play after stop/
pause
Go to the next chapter,
track, MP3/WMA/
JPEG/DivX files or
scene
Go back to the
preceding MP3/WMA/
JPEG files
Go back to the
preceding chapter,
track, DivX files or
scene
Turn off the sound
temporarily
Stop play and remove
the desired disc
Playing time
Press
x
X
N/X
>
.
. twice.
When you press . once,
you can go to the beginning
of the current chapter,
track, or scene.
MUTING.
To cancel, press it again or
VOLUME + to adjust the
sound volume.
Z