Cpu; Installing The Cpu - DFI CP100-NRM User Manual

2
Hardware Installation

CPU

Overview
The system board is equipped with a surface mount rPGA 988A CPU socket.
Note:
The system board used in the following illustrations may not resemble
the actual one. These illustrations are for reference only.

Installing the CPU

1. Make sure the PC and all other peripheral devices connected to it has been
powered down.
2. Disconnect all power cords and cables.
3. L oc at e t he r PG A 98 8A
s o c k e t o n t h e s y s t e m
board.
4. Make sure the screw is in
its unlock position. If it's
not, use a screwdriver to
turn the screw to its unlock
position.
20
Lock
Unlock