Huawei Quidway S3000-EI Series Operation Manual page 9

Operation Manual - Remote Power-feeding
Quidway S3000-EI Series Ethernet Switches
II. Networking diagram
S3026C - PWR S3026C - PWR
E0/1 E0/1 E0/1 E0/1
S2016C S2016C S2016C S2016C
Figure 1-2 An example for remote power-feeding
II I. Configuration procedure
# Enable remote power-feeding on Ethernet0/1, Ethernet0/2 and Ethernet0/24 (this is
the default configuration and can be therefore omitted.)
[Quidway-Ethernet0/1]
[Quidway-Ethernet0/2] undo poe disable
[Quidway-Ethernet0/24] undo poe disable
# Enable Ethernet0/2 to supply power th
[Quidway-Ethernet0/2] poe mode spare
# Set Ethernet0/1 to have a maximum p
milliwatt.
[Quidway-Ethernet0/1] poe max-power 12000
[Quidway-Ethernet0/2] poe max-power 3000
# Set the priority of Ethernet0/24 to be critical to e
PDs.
[Quidway-Ethernet0/24] poe priority critical
# Configure the power manage
[Quidway] poe power-management auto
# Enable the compatibility detection of PDs on the switch
those PDs that do not comply with 802.3af.
[Quidway] undo poe legacy disable
1.4.2 Upg rading PoE daughter-card Configuration Exam
I. Networking requirements
The switch
on FTP server: Configure a FTP user named as
read & write authority over the Switch root dire
Network Network Network Network
E0/24 E0/24 E0/24 E0/24
E0/2 E0/2
E0/2 E0/2
AP AP AP AP AP AP AP AP
undo poe disable
ment mode in auto mode.
serves as FTP client and the remote PC as FTP server. The configuration
Huawei Technologies Proprietary
Chapter 1 Remote Power-Feeding Configuration
rough spare lines.
ower of 12000 milliwatt and Ethernet0/2 3000
nsure preferential power supply for its
switch, with password hello and with
ctory on the PC. The IP address of a
1-8
so that it can supply power to
ple