Advertisement
Quick Links
JABRA FreeSpeak
BEFORE USING YOUR HEADSET
Charge FreeSpeak – FreeSpeak is rechargeable and must be charged before use.
1. Insert the headset fully into its multi-adapter.
2. Plug one end of the AC power adapter into the multi-adapter and the other end into an
electrical wall outlet.
3. Charge your headset for approximately 2 hours or until both blue indicator lights go out.
Important: Blue indicator lights on the headset and multi-adapter will both be on while
charging and will turn off when charging is complete.
Connect multi-adapter to phone
• For phones with standard 2.5mm headset jacks: Plug the multi-adapter's connector into the
2.5mm headset jack on your phone.
•
For i2000plus, i2000, i1000plus, i1000, r750plus, i700plus, i550plus, i500plus and i500
phones: Plug the audio adapter (sold separately) into your phone. Then plug the multi-
adapter's connector into the audio adapter.
IMPORTANT
R E A D THIS FIRST
QUICK START GUIDE
TM
For Nextel Phones
Model #:100-91030000-02
Model #:100-91130000-02
Model #:100-91430000-02
MiniGel™
Location of phone's headset
jack may vary.
Headset Indicator Light
(Blue LED)
Multi-Function Button
Volume Control Button
NON-BT
Advertisement
Related Manuals for Jabra FreeSpeak 100-91030000-02
Summary of Contents for Jabra FreeSpeak 100-91030000-02
-
Page 1: Quick Start Guide
Plug the audio adapter (sold separately) into your phone. Then plug the multi- adapter’s connector into the audio adapter. IMPORTANT R E A D THIS FIRST QUICK START GUIDE For Nextel Phones Model #:100-91030000-02 Model #:100-91130000-02 Model #:100-91430000-02 Headset Indicator Light (Blue LED) Multi-Function Button Volume Control Button Location of phone’s headset... -
Page 2: Basic Operations
BASIC OPERATIONS Turn headset on/off – Press the multi-function button burst of flashes on the blue indicator light, then release. The indicator lights on the headset and multi-adapter will flash every 3 seconds while the power is on and in “Standby” mode. If you are already wearing the headset, you’ll hear a quick series of FOUR tones when turning the headset on or off. -
Page 3: Status Indicators
If you are enabling Answer/End feature for the first time, you should test answering and ending calls to ensure that your phone supports this feature. For more information, see “Enhanced Features” at www.jabra.com/fscs. Calls can be ended by the headset only by waiting for the line to disconnect. - Page 4 TIPS & SOLUTIONS To prolong battery life: • After you’ve ended a call using your phone’s keypad, always remember to place the headset in Standby mode by pressing and releasing • Dock the headset firmly in its multi-adapter when not in use. If you press and release and the headset stays in Standby mode: If FreeSpeak becomes unpaired, it will not respond to the...
- Page 5 (including parts of the body) between your headset and the multi-adapter. Need more help? 1. Consult the complete User’s Guide 2. Web: www.jabra.com/fscs (for the latest support info) 3. Telephone: (858) 622-9955, Monday to Friday 8am to 5pm PST (800) EAR-2230 (USA and Canada)