System Info; Demo; Tv Type; Language - Sony VRD-MC10 Operating Instructions Manual

Sound
Specify the audio signal from the HDMI OUT
connector.
c Auto
Select [Auto] unless necessary to specify the
audio output. This outputs the audio signal
suitable for the TV.
PCM
Down-mixes the audio signal to Linear PCM 2ch
and outputs from HDMI OUT.
b Note
• If your TV does not support Dolby Digital, DTS or
AAC, connecting it to the DVDirect and selecting
[Auto] may not get sound. Select [PCM], if you get no
sound.

System Info

You can check the system software version of the
DVDirect.
Select [System Info] to view the version of
system software.
Select [Reset System] to clear the history stored
on the DVDirect and revert the settings to the
factory default.
z Hints
• The system software is the built-in software that makes
the DVDirect work.
• Selecting [Reset System] clears the recording history
necessary for copying only new video/photo and resets
the customized settings.

Demo

The DVDirect automatically plays a demo when
it is not operated for a set period of time.
OFF
Disables the demo.
c ON
Enables the demo.
68

TV Type

You can select the aspect ratio of the connected
TV.
c 16:9
Select this when you connect a wide-screen TV.
4:3
Select this when you connect a 4:3 screen TV.

Language

Select the language display for the display
window.