Screen Menu - Hitachi CP-X10000 User Manual

SCREEN menu

SCREEN menu SCREEN menu
From the SCREEN menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor
button on the projector or remote control, or ENTER
button on the remote control to execute the item.
Then perform it according to the following table.
Item
LANGUAGE
MENU POSITION
BLANK
(continued on next page)
42
Using the ▲/▼/◄/► buttons switches the OSD (On Screen
Display) language.
Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press the MENU
or keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
26 ). It is displayed by pressing the BLANK
(
control.
MyScreen ORIGINAL
MyScreen
ORIGINAL
BLUE, WHITE,
BLACK
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
ENTER
Description
MENU button on the remote control
BLANK button on the remote
BLUE
Feature
Screen can be registered by the MyScreen item
44 )
(
.
Screen preset as the standard screen.
Plain screens in each color.
WHITE BLACK