Gamma - Toshiba teli BG030 Instruction Manual

Gamma

This section describes Gamma correction of AnalogControl category for the BG series.
This function allows you to apply a gamma correction to the output images.
● Registers
Register
Gamma
● Setting
- Set Gamma correction
Set the following value to "Gamma" register. Setting value is Float type.
● Note
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
output
luminance
Gamma
Fig. Gamma correction
Visibility Access
Beginner R/W Sets the Gamma correction.
Gamma
Minimum
Maximum (*)
input
luminance
Description
setting value
0.45
1.00
* initial factory setting
56 / 69
D4211908D
http://www.toshiba-teli.co.jp/index.htm