I/O Specification - Toshiba teli BG030 Instruction Manual

I/O Specification

● Signal Specification
- Trigger Input
Input Circuit
Level
Polarity
Pulse Width
Notes of external trigger signal:
Depending on cable length, cable kinds and input current of trigger input line, Random Trigger Shutter operation may not
satisfy timing specification or camera
may not receive EXT_TRIG signal. Please confirm it before use.
- GPIO Output
Output Circuit
Level
Polarity
Signal Source
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
: Opto coupler input
: Low 0 ~ 0.5V, High 3.3 ~ 24.0V
: Positive / Negative bipolar (initial factory setting: Negative)
: Minimum 200μs
: LINE1 LVTTL output
LINE2 Opto coupler output
: LINE1 LVTTL
LINE2 Open collector
: Positive / Negative bipolar (initial factory setting: Negative)
: VD
TIMER0 ACTIVE
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
21 / 69
D4211908D
http://www.toshiba-teli.co.jp/index.htm