Specifications; Overview; Features - Toshiba teli BG030 Instruction Manual

Overview

This BG B/W series is an integrated-(one-body)-type monochrome camera that adopts all pixel data readout
inter line CCD. There are 4 models according to the sensor type. These are BG030 (VGA: 1/3 type), BG031
(VGA: 1/2 type), BG080 (XGA: 1/3 type), and BG130 (SXGA: 1/3 type). For video output, the Gigabit
®*
Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into
industrial equipment.
®
* Ethernet is a registered trademark of XEROX Corporation.

Features

● High frame rate and high resolution
Supported high frame rate BG030: 125fps / VGA (1/3 type), BG031: 125fps / VGA (1/2 type), BG080: 40fps /
XGA (1/3 type), BG130: 30fps / SXGA (1/3 type).
● All pixel readout
All pixel signals (in the effective area) are output in one frame processing.
● Full frame shutter
Since all pixels are output even in Random Trigger Shutter operation, high resolution can be achieved,
without deteriorating the vertical resolution.
● Square grids
The CCD pixels arrayed in square grids facilitates computation for image processing.
● Gigabit Ethernet interface (Power over Ethernet)
Video output and camera control are performed via the Gigabit Ethernet standard IEEE802.3ab interface.
Data transfer is up to 1Gbps (Maximum) that enables to output uncompressed video data at high frame rate.
By complying with IEEE802.3af Power over Ethernet (PoE), the power is supplied over single cable.
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.

Specifications

12 / 69
D4211908D
http://www.toshiba-teli.co.jp/index.htm