Download Print this page

Advertisement

BG Series
CCD B/W Camera

Instruction Manual

Model
BG030 / BG031 / BG080 / BG130
Thank you for purchasing our product.
Before using this CCD camera, Please read through this instruction manual
carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to,
whenever you need it.
Information contained in this document is subject to change without prior notice.
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
D4211908D
http://www.toshiba-teli.co.jp/index.htm

Advertisement

   Related Manuals for Toshiba BG030

   Summary of Contents for Toshiba BG030

  • Page 1: Instruction Manual

    After reading, keep this instruction manual handy so that you can refer to, whenever you need it. Information contained in this document is subject to change without prior notice. D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 2: Table Of Contents

    Gain ............................53 BlackLevel ..........................55 Gamma ............................56 LUTControl ..........................57 TransportLayerControl ........................ 58 UserSetControl ........................... 62 ALCControl ..........................64 Warranty rules ......................68 Repair .......................... 69 1 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 3: Safety Precautions

    The content of prohibition is shown by a picture or words beside the symbol. This sign indicates MANDATORY ACTION (You are required to do). MANDATORY The content of action is shown by a picture or words beside the symbol. 2 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 4: General Handing

     Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled, placed under heavy objects or heated the power cable and the connection cable. Avoid Otherwise, fire or electric shock may result. 3 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 5

    (every approx five years). Accumulation of dust inside the equipment may result in fire or electric shock. For inspection and cleaning costs, contact your sales representative. Instruction 4 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 6: Cases For Indemnity (limited Warranty)

    ● The item that is not described in specifications of this product is out of the guarantee. ● The case of damages or losses which are caused by incorrect connection of the cable is out of the guarantee. 5 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 7: Restriction For Use

    (*2): Equipment relating to maintenance of public services/functions involving factors of safety refers to. - Traffic control systems for air transportation, railways, roads, or marine transportation - Equipment for nuclear power generation - Equipment related to the above 6 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 8: Notes On Using This Product

    Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction. 7 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 9

    Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the paint and indications. If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative. 8 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 10

    Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be require to correct the interference at his own expense. 9 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 11

    This information is applicable for People's Republic of China only. リサイクルに関する情報(包装物) 有关再利用的信息(包装物) Information on recycling of wrapping composition 内部緩衝材料・袋 内部缓冲材料·袋 箱/箱子/Box Internal buffer materials・Bag ペーパーボード 纸板 Paper board 10 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 12: Installation

    / distributor. ● TOSHIBA TELI CORPORATION Top Page http://www.toshiba-teli.co.jp/index.htm ● Service & Support https://www.toshiba-teli.co.jp/cgi/ss/en/service.cgi Please refer to the TeliGevSDK startup guide, about Operation environment, Installation, and Setup. 11 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 13: Specifications

    This BG B/W series is an integrated-(one-body)-type monochrome camera that adopts all pixel data readout inter line CCD. There are 4 models according to the sensor type. These are BG030 (VGA: 1/3 type), BG031 (VGA: 1/2 type), BG080 (XGA: 1/3 type), and BG130 (SXGA: 1/3 type). For video output, the Gigabit ®*...

  • Page 14

    Gigabit Ethernet by reducing horizontal output area. ● Compact and lightweight This camera is compact and lightweight; it is easy to integrate into industrial equipment. ● EU RoHS & Chinese ROHS 13 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 15: Configuration

    PoE. Please use 1000BASE-T equipments, supporting Jumbo Frame is recommended. *1: Optional part. Contact your dealer / distributor for details of option units. *2: Commercial items. 14 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 16: Connection

    Please confirm it before use. Lost packets may occur by an electrical characteristic of the transmission line of using Ethernet devices (LAN cable, Network Interface Card, Switching HUB). 15 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 17: Connector Pin Assignment

    Pin No. Signal Function +12V Power Line 0 External Trigger Input Line 1 GPIO_0 Output (LVTTL) Line 2 GPIO_1 Output (Open Collector) I/O GND I/O_Ground Ground 16 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 18

    This camera has two ways of power supply, - Supply from LAN cable (PoE) - Supply from camera cable (DC+12V ±10%) If both PoE and DC+12V are connected, power is supplied from PoE. 17 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 19: Outline Drawing

    Outline Drawing 18 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 20: General Specifications

    Camera body grounding: No conductive between circuit GND and camera body insulation status *1 F1.4, Gain: Maximum (+18dB), video level: 50% *2 at the all pixel readout 19 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 21

    Depends on your PC or Gigabit Ethernet interface board configurations, images may not be captured properly (e.g. dropping frames). In this case, change to frame rate setting lower. 20 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 22: I/o Specification

    LINE2 Open collector Polarity : Positive / Negative bipolar (initial factory setting: Negative) Signal Source : VD TIMER0 ACTIVE EXPOSURE ACTIVE FRAME ACTIVE FRAME TRANSFER FRAME TRIGGER WAIT 21 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 23: Circuit Diagram

    External Trigger Signal Input Circuit LINE0 (2pin) TRIG_IN (5pin) I/O_GND TLP291 - GPIO Output GPIO Signal Output Circuit LINE2 GPIO0 (3pin) (6pin) LINE3 (4pin) GPIO1 TLP291 (5pin) I/O_GND 22 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 24

    Trigger amplitude +3.3V 2.92 26.2 +12V 2.12 31.2 +24V 2.12 31.2 * Toff and Ton are typical value. * These values are changed in operating environment. 23 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 25

    Toff [μs] Ton [μs] Pull-up amplitude +3.3V 53.2 +12V 78.4 +24V 94.4 * Toff and Ton are typical value. * These values are changed in operating environment. 24 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 26

    Trigger in Width High Trig in (logic) High threshold Anti Chattering Low threshold Sampling Process Count Sampling step High Act Trig Actual Trigger Width Fig. Anti-chattering process 25 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 27: Timing Specification

    PayloadSize is total bytes of single frame. The formula applies when SCPS (Stream Channel Packet Size) is 1500 byte / packet. (T1 varies depending on the value of SCPS) 26 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 28

    When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility of causing the malfunction. In this case, please input a proper trigger signal. 27 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 29: Typical Spectral Response

    Typical Spectral Response * The lens characteristics and light source characteristics is not reflected in table. ● BG030 1000 Wave Length [nm] ● BG031 1000 Wave Length [nm] 28 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 30

    ● BG080 1000 Wave Length [nm] ● BG130 1000 Wave Length [nm] 29 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 31: Operating Ambient Conditions

    - DC Cable CPCBG-03 - LAN Cable C5e(S-HFR)(K)-* (Oki Electric Cable Co., Ltd.) Please confirm the EMC adaptability when it combines with parts other than them. 30 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 32: Functions

    Set black level Gamma Set gamma correction LUTControl LUTControl Control LUT TransportLayerControl TransportLayerControl Control transport layer UserSetControl UserSetControl Load / Save user setting ALCControl ALCControl Control ALC operation 31 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 33: Devicecontrol

    Executes activating the validation of the consistency. DeviceRegistersCheck Expert Executes the validation of the current register set for consistency. Returns the result that executed “DeviceRegistersCheck”. DeviceRegistersValid Expert TRUE: Consistency, FALSE: Inconsistency 32 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 34: Scalable

    Sets horizontal offset (in pixels) from the origin to the region of interest. OffsetY Beginner Sets vertical offset (in pixels) from the origin to the region of interest. 33 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 35

    White lines may occur in the upper portions of the screen when strong light exists in a wide area during the scalable mode. This is not a malfunction. If white lines occur, adjust the amount of incident light using the lens. 34 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 36: Binning

    Horizontal & Vertical Vertical binning binning Fig. Binning operation (e.g. VGA) ● Registers Register Visibility Access Description BinningHorizontal Beginner Set horizontal binning. BinningVertical Beginner Set vertical binning. 35 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 37

    The range of register setting depends on camera model. Changing “BinningHorizontal”, “BinningVertical” register value effects Scalable registers. Changing “BinningHorizontal”, “BinningVertical” register value is invalid during image stream data output. 36 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 38: Pixelformat

    Mono10 Mono 10 bit Bpp10: 10 bits per pixel * initial factory setting ● Note Changing “PixelFormat” register value is invalid during image stream data output. 37 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 39: Testimageselector

    TestImageSelector BG B/W series support test pattern data output. Camera provides following Test patterns; Black White BrightGrey DarkGrey GreyHorizontalRamp Fig. Test pattern 38 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 40

    All pixel = 255 @Mono8 BrightGrey All pixel = 170 @Mono8 DarkGrey All pixel = 85 @Mono8 GreyHorizontalRamp Horizontal Ramp * initial factory setting ● Note 39 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 41: Acquisitioncontrol

    The range of register setting depends on camera model, and camera operation mode. setting value FrameRate Minimum 0.0625[Hz] Maximum (*) Depend on register setting of "Height" and "Binning" or link speed of interface. * initial factory setting 40 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 42

    Depends on your PC or Gigabit Ethernet interface board configurations, images may not be captured normally (e.g. frame drops may occur). In this case, change to frame rate setting lower. 41 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 43: Triggercontrol

    And you can add delay time from trigger edge to exposure start by register setting. Trigger signal TriggerDelay Exposure GbE bus Image Fig. Trigger Delay Details of Random Trigger Shutter operation, refer to "Timing" of "Specification". 42 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 44

    - Changes trigger polarity (HardwareTrigger operation only) Set the following value to “TriggerActivation” register. Setting value is Enumeration type. setting value Polarity FallingEdge (*) Negative RisingEdge Positive * initial factory setting 43 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 45

    Changing “TriggerMode”, “TriggerSource”, “TriggerActivation” registers value is invalid during image stream data output. When SoftwareTrigger operation, the period from execution of “TriggerSoftware” to grab image is an indefinite. 44 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 46: Exposurecontrol

    Fig. Exposure control ● Registers Register Visibility Access Description ExposureMode Beginner Selects manual exposure mode. ExposureTime Beginner Sets absolute exposure time(timed mode). ExposureAuto Beginner Sets AE operation. 45 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 47

    Off (*) Manual Exposure control Auto Exposure control * initial factory setting ● Note Changing “ExposureMode” register value is invalid during image stream data output. 46 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 48: Digitaliocontrol

    Expert Selects the polarity of GPIO output signal. LineSource Expert Selects the source of the output signal. LineFormat Expert Returns the type of each Line signal. 47 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 49

    The delay time and pulse width of this signal are configurable. Internal VD sync signal. * initial factory setting ● Note About the details of Timer0Active signal, refer to “TimerControl” of "Functions". 48 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 50: Timercontrol

    - Set the width of Timer0Active pulse Set the following value to “TimerDuration” register. Setting value is Float type. TimerDuration Pulse width 0.00[μs] Minimun (*) 4095.00[μs] Maximum * initial factory setting 49 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 51

    Set the following value to “TimerDelay” register. Setting value is Float type. TimerDelay Dlay value 0.00[μs] Minimun (*) 4095.00[μs] Maximum * initial factory setting ● Note 50 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 52: Eventcontrol

    Returns the average luminance at the time of Event. EventALCConvergedExposureTime Expert Returns the exposure time at the time of Event. EventALCConvergedGain Expert Returns the gain at the time of Event. 51 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 53

    Set the following value to “EventNotification” register. The setting value is Enumeration type. setting value Event notification Off (*) Inactive Active * initial factory setting ● Note 52 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 54: Gain

    Register Visibility Access Description GainSelector Beginner Returns the luminance component of Gain setting. Gain Beginner Sets the absolute Gain. GainAuto Beginner Sets activation of AGC mode. 53 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 55

    Setting the gain value too high increases noises. When you adjust the brightness of the image, I ask you to have final image quality checked with your environment. 54 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 56: Blacklevel

    Set the following value to “BlackLevel” register. Setting value is Float type. BlackLevel setting value Minimum -5.00[%] Maximum +25.00[%] * initial factory setting = 0.00[%] ● Note 55 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 57: Gamma

    Set the following value to “Gamma” register. Setting value is Float type. Gamma setting value Minimum 0.45 Maximum (*) 1.00 * initial factory setting ● Note 56 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 58: Lutcontrol

    “LUTIndex” register value is input level of LUT process, and “LUTValue” register value is output level of LUT process. LUTIndex / LUTValue setting value Minimum (*) Maximum 1023 * initial factory setting ● Note 57 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 59: Transportlayercontrol

    Sets Persistent IP Address. GevPersistentSubnetMask Beginner Sets Persistent IP Subnet Mask. GevPersistentDefaultGateway Beginner Sets Persistent IP Default Gateway. GevLinkSpeed Expert Returns the speed of transmission negotiated. 58 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 60

    Sets the destination IP address of the stream channel. GevSCSP Guru Returns the source port of the stream channel. BlockStartDelay Expert Sets the delay to insert between each image flame for the stream channel. 59 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 61

    In this case, change the packet size more than 1500[byte/packet]. And we recommend you to use network equipments (NIC, Switching HUB, etc. ) supporting Jumbo Frame. 60 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 62

    = ( T ) ) x 3 SCPS - 36 Fig. Packet delay 設定値 GevSCPD BlockStartDelay Minimum (*) Maximum 0xFFFFFFFF 0xFFFFE795 * initial factory setting ● Note 61 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 63: Usersetcontrol

    Executes load of the user setting. UserSetSave Beginner Executes to save the user setting. UserSetDefaultSelector Beginner Selects a bank of user setting when camera powers up. 62 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 64

    “UserSetDefaultSelector” register and applies them at the time of next start-up. ● Note Changing “UserSetLoad” register value is invalid during image stream data output. 63 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 65: Alccontrol

    Sets a minimum value of the gain when ALC(AGC) feature is running. ALCGainMax Expert Sets a maximum value of the gain when ALC(AGC) feature is running. 64 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 66

    An Image luminance at ALC operation converges on a reference luminance. (at ALCExposureValue = 0 [eV]). ReferenceLuminance setting value Minimum Maximum * initial factory setting = 84 65 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 67

    Set the following value to “ALCLock” register. The setting value is Boolean type. You can lock ALC operation by using this function. setting value Activation FALSE (*) inactive TRUE active * initial factory setting 66 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 68

    0.00[dB] (*) more than GainMin Maximum less than GainMax 18.00[dB] (*) * initial factory setting ● Note ALC operation at Random Trigger Shutter mode is not guaranteed. 67 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 69: Warranty Rules

    9. Forgery product, products which does not have proper serial number, products of which serial number is forged, damaged or deleted 10. All defects that happened after the expiration for a warranty term 68 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 70: Repair

    10. The immunity from responsibility of the product is applied in the repair completion products. * Please refer for the inquiry about the software to our homepage or sales personnel. 69 / 69 D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

  • Page 71

    □ It certainly occurs. □ It sometimes occurs. □ It occurs, after time passes. ( □ Others ) <For dealer use> Reception date : Receipt No. : JOB No. : Check : D4211908D Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm...

This manual also for:

Bg080, Bg130, Bg031

Comments to this Manuals

Symbols: 0
Latest comments: