How To Set E.s.p - LG MFL65003102 Installation Manual

How to Set E.S.P?

How to Set E.S.P?
This is the function that decides the strength of the wind for each wind level and because this function is
to make the installation easier.
• If you set ESP incorrectly, the air conditioner may malfunction.
• This setting must be carried out by a certificated-technician.
Function code,
ESP code
ESP value
• When setting ESP value on the product without very weak wind or power wind function, it may not
work.
30 Vertical Air Handling Unit
1 If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If entering into ESP setup mode by using
button, it indicates as the picture
below.
3 Select ESP fan step by pressing
button. (01: very low, 02: low, 03:
medium, 04: high, 05: power)
4 Move to ESP value setting by pressing
button.
(It is 000 when delivering
from the warehouse.)
5
Press
(It is possible to setup ESP
value from 1 to 255, and 1 is
the smallest and 255 is the
biggest.)
ESP step
Function Code
button to setup ESP value.
ESP value