Aux Input; Alarm Mode - Hyundai H-1507 Instruction Manual

Radio with alarm
Hide thumbs Also See for H-1507:
Table of Contents

Advertisement

Available languages

Available languages

Instruction manual
to return to clock mode.

AUX input

To connect an external audio device (eg.
MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
the audio line-out of the external device to the
AUX input socket of this unit.
LED display functions
• If the AC/DC adapter is off, you can turn
off the display by setting the DISPLAY OFF
switch to "OFF" position. In this mode you can
switch it on for 10 seconds by pushing any
button or by a loud sound (eg. clapping your
hands).
• The brightness of the display is set to be
half-bright during 21:00PM - 6:59:59AM.
Radio operation
• In clock mode press RADIO button to
switch the radio on.
• To adjust the frequency step by step
press repeatedly UP/DOWN buttons. For
automatic search of a station, press and hold
UP or DOWN button; the unit will look for the
next available station and start its broadcast.
Repeat the operation to search more stations.
• To save a station, press and hold SET
button. Press SET button to switch between
saved stations.You can save up to 20 stations
in the memory.
• Press and ALARM key for 3 seconds
to set sleeping time of radio, then press
TURN+ or TURN- to change the sleeping time
between 10/20/30/40/50/60 minutes. After
setting sleeping time, press ALARM key to exit
settings. When time expires, radio will turn off.
During program saving, if no button is
pressed within several seconds, the unit will
return to normal radio mode.
• To adjust volume, in radio mode press
repeatedly VOL+/VOL- buttons.
• To switch off the radio, press MODE button.
4
Alarm operation

Alarm mode

• In clock mode, press MODE button to
activate the alarm mode.
• In alarm mode press and hold SET button
to set the alarming time. Press repeatedly
SET button to go to setting of parameters in
following sequence: hours => minutes => exit.
When setting, the set digits of time will flash.
Press UP or DOWN buttons to adjust the time.
if no button is pressed within 30 seconds after a
parameter is selected, the unit will automatically
set the alarm.
• If no button is pressed within 30 seconds in
alarm mode, the unit will exit to clock mode.
Alarm ringing
• When setting alarm, press RADIO button,
then the playing radio station will be set as the
alarm (the playing radio frequency is set as the
last played radio frequency),
Ringing will last 15 minutes.
• If the radio station was not set as an alarm
signal, then the unit will beep perionically.
• After setting the alarm, press MODE button
to exit to clock mode.
• Press ALARM button and the alarm mode
will be on and an "ALARM" indicator will
appear on the screen.
• When the alarm goes off press any button
(except the SNOOZE button) to stop the alarm.
If SNOOZE button is pressed the "SNOOZE"
indicator will flash on the screen. Snooze time
is 5 minutes (snooze function can be used 2
times in a row).
Maintenance and care
If necessary, clean the unit with a piece of
cloth dampened with water only (be sure the
power cord is disconnected). The unit shall not
be exposed to dripping or splashing and no
objects filled with liquids, should be placed on

Advertisement

Table of Contents
loading

Table of Contents