Garmin Nuvi 500 Series Owner's Manual page 55

Appendix
Problem/Question
The touch screen is not
responding to my touches
properly.
How do I know my nüvi
is in USB mass storage
mode?
My computer never
senses that the nüvi is
connected.
I cannot see any new
removable drives in my list
of drives.
How can I find restaurants
near the hotel I will be
staying at in the future?
48
Autogood products internet store http://130.com.ua
Solution/Answer
Calibrate the touch screen as described on
When your nüvi is in USB mass storage mode, a picture of a nüvi
connected to a computer is shown. Also, you should see two new
removable disk drives listed in
1. Unplug the USB cable from your computer.
2. Turn the nüvi off.
3. Plug the USB cable into a USB port on your computer and
into your nüvi. The nüvi automatically turns on and goes into
USB mass storage mode. Ensure that your nüvi is connected
to a USB port and not a USB hub.
If you have several network drives mapped on your computer,
Windows can have trouble assigning drive letters to your nüvi
drives. See your operating system Help file to learn how to map
or assign drive letters.
1. Touch Where To?
vacation destination).
2. Find the hotel, and touch Go!.
3. Touch Menu > Where To?
4. Search for a restaurant. Restaurants nearest your hotel are
listed first.
You can also use the GPS simulator
System).
page
My Computer.
> Near > Different City
> Near > My
(Tools >
nϋvi 500 Series Owner's Manual
39.
(and enter your
Destination.
Settings >