Assembly And Use Instructions - iRobot Scooba Owner's Manual

Assembly and Use Instructions

1. Empty contents of box (pre-assembled).
Charging Stand Base
Charging Stand Base Plate
3. Plug power supply cord into hole first then lift
and place the power supply into the base.
5. Plug the stand in and place Scooba on the
stand to charge and dry after each use.
For additional maintenance instruction or support please visit global.irobot.com.
Charging Stand
2. Press tabs and pull to remove bottom plate.
4. Plug line cord into power supply and snap
bottom plate onto the base.
Snaps in
5