Installation; Introduction To The Main Interface - Pix-Star Wireless Digital Picture Frame User Manual

2. Installation

First, plug the AC adapter in the DEVICE. Its plug is located on the side of the device. Then, plug
the AC adapter to a power line.
To power on the device, move the switch button located on the side of the device, on the left.
After that, the device should display a logo on its screen. Wait for a while, the device needs
about 30 seconds before being ready to be used.

3. Introduction to the main interface

After you power the device on and wait for a while, pictures should be displayed.
Using the buttons behind the device, you can enter the menus and browse them. To open the
main menu, press the Menu button twice. To enter the desired menu, press the
Note: The Back button on the remote control allows you
to go back to the previous menu or to leave the main
menu.
button.
7