Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Silver Star SPOT 150
Summary of Contents for Silver Star SPOT 150
-
Page 1: User Manual
SPOT 150 USER MANUAL www.yagang.com... - Page 2 DIMENSIONS 29cm 17cm 25cm 450cm 40cm 11cm 370cm 30cm 135¡ ã 135¡ ã 180¡ ã 180¡ ã...
-
Page 3: Install The Lamp
Don't touch the metal parts of light during devise is working. Don't open the cover for there have no parts the user can repair. Don't operate the light without lamps. If the light equipment doesn't as light as before or there have some destroy with lens or other parts, please contact the distributor in time. -
Page 4: Installation
OPEN BOX TO CHECK This product use new high temperature-resistance project plastic to make. It has a beautiful surface to show the characteristic of new stage lights. Y It is made accord CE standard. It accord with the international DMX512 agreement. Single or several can be used at same time. - Page 5 Light 1 Light 2 Lignt N Control singal input Output and input connect together Output and input connect together TE R MINATO R Note : Please remember the signal output of last machine must connect the attached circle plug. The circle plug connect a 120 ¦...
-
Page 6: Installing The Projector
INSTALLING THE PROJECTOR The projector should be mounted via its bracket using one M12 bolt. The bracket itself attaches to the underside of the projector with two(2)M8x25 bolts provided. Always ensure that the projector is firmly anchored to avoid vibration and slipping whilst operating. -
Page 7: Panel Control
The display shows the DMX start address after the projector is switched on (if you have already set the DMX start address and saved it, the screen will display the last setting). TO SET THE DMX START ADDRESS : Press the UP or DOWN buttons and the display will show the DMX start address. Confirm your choice by pressing the ENTER button, this will save and set the DMX start address. - Page 8 DMX 512 OPERATE MODE If all channels are 255,the light equipment reset. The product has 7 operate channels and use international standard DMX512 signal. The details as following: channel Function 0-19 white 20-39 40-59 yellow 60-79 pale green 80-99 dark blue 100-119 pink color...
-
Page 9: Specification
SPECIFICATION Rated voltage: AC220~240V, 50/60Hz Rated power: 200W Bulb: HTI 150W Electric strength: 1.5kv Insulation resistance:>2M ¦ ¸ Channel: 7 channels Signal: DMX512 Control mode: DMX512 controller Color: 9 colors + white, rainbow effect Design: 7 different gobos + white beam, rainbow effect Strobe: 0-8 times/SEC, adjustable Rotation angle: horizontal:370 , vertical:265 Size: 370 275 375mm... - Page 10 ELECTRICAL DIAGRAM...
- Page 11 COMMON FAULTY MAINTAIN FAULTY FAULTY PART PART No. FAULTY ANALYSIS PHENOMENON Plug cable for PC 27-00-0005-01 Power plug loose Whole light cann't work T3.15A 5*20DIA 09-00-3151-00 Power fuse faulty Reach the lifespan or bed 07-07-0150-00 HTI 150w quality of bulb Trigger faulty 11-10-0010-00 Electronic trigger...
Need help?
Do you have a question about the SPOT 150 and is the answer not in the manual?
Questions and answers